Questions and answers about the grade of ferrite magnets
The specifications Y35, Y30BH, Y26H and HF 24/23 are a measure of the grade of the ferrite magnet
used.
From this designation, you can ascertain the following facts:
- Up to what maximum temperature you can use the magnet.
- How much "magnetic energy" per volume is stored in this magnetic material.
Table of Contents
Possible standards for physical properties
There are various standards for the physical features of ferrite magnets.
- Chinese Standard SJ285-77
- United States Industry Standard (US Ind. Standard)
- International Electrotechnical Commission DIN IEC404-8-1
The standards differ mostly by the defined value spectrums.
Therefore, magnets of different standards can't be compared equally.
Our magnets correspond to the Standard Y35 of the SJ-285-77.
This standard is somewhat similar to C5 of the U.S.
Industry Standard or HF26/18 of the DIN IEC 404-8-1.
The DIN IEC Standard is very common in Europe.
The classification number is made up of the simplification of the minimum level of the energy product in kJ/m³ and the coercive field strength iHc in kA/m.
e.g.
HF24/16: (BxH)max = 24.0 - 25.5 kJ/m³ / iHc = 160 - 180 kA/m
When we talk colloquially about the "power"
of a magnet, we usually mean the strength of attraction on a ferromagnetic
or magnetic surface.
This surface typically consists of iron, industrial or structural steel or another magnet.
The strength is not only determined by the magnetic material used; equally important are the following factors:
- Volume of the magnet
- Shape of the magnet
- Proportions of the magnet (e.g. the ratio of the diameter to the height of a disc magnet)
- Combination with other materials; e.g. is the magnet mounted on a piece of metal, in a metal pot, or is it "free-standing".
What does the specification Y35 mean?
Y35 describes the grade of the magnet material used for ferrite magnets,
according to the Chinese Standard SJ285-77.
This is a common standard in China that we use as well.
The exact physical values can be found in the table Physical magnet data.
The majority of ferrite magnets in our assortment are grade Y35:
-
5 pcs. 0,56 EUR ea.*
Disc magnet Ø 30 mm, height 10 mm, holds approx. 2,3 kg -
5 pcs. 1,63 EUR ea.*
Disc magnet Ø 60 mm, height 15 mm, holds approx. 4,9 kg -
10 pcs. 0,50 EUR ea.*
Block magnet 20 x 20 x 3 mm, holds approx. 450 g -
5 pcs. 1,08 EUR ea.*
Block magnet 40 x 20 x 10 mm, holds approx. 2,5 kg -
10 pcs. 0,45 EUR ea.*
Ring magnet Ø 40/22 mm, height 9 mm, holds approx. 2,7 kg
How is the grade designation structured according to the Chinese standard SJ285-77?
The letter Y
In this standard, all grades of ferrite magnets begin with the letter Y. The Y stands for the material ferrite, derived from the first letter of the Chinese character for ferrite.The number
The number (i.e. 35, 30, 26) represents the maximum energy product of the magnet in MGOe (mega-gauss-oersted). The MGOe is an indicator of the strength of the magnet. It shows how much energy the magnet can store. The following applies: the higher the number, the stronger the magnet. The highest possible maximum energy product for a ferrite magnet is 43, and the lowest energy product is 8. In our online shop, we carry ferrite magnets with a maximum energy product of 26, 30 and 35.This number classification is based on the magnetic properties of the magnet and is not an indication of its quality.
In the table with the physical magnet data,
you can see the relationship between this classification and the physical values of a magnet.