Which magnets are suitable for magnetic name tags?
Table of Contents
Ready-to-go magnetic name tags
For professional-looking magnetic name tags we recommend our ready-to-go products that you can buy in our online shop:
- Name tag set
- Name tag with card holder (in the picture)
- Name tag blank cards
Making magnetic name tags yourselfLarge private parties such as weddings often need name tags. Many people want to make sure not to ruin their festive clothing with safety pins. Also, you might want to have a hand in designing the name tags and not just buy off-the-shelf products. There is a solution to design your own name tags and attach them with strong disc magnets.
Attention: People with pacemakers must not use these magnetic name tags under any circumstances!
Name tags with self-adhesive magnets
You always need 2 disc magnets per name tag.
First stick a self-adhesive magnetic disc 10 x 1 mm centered on the backside of your home-made name tag. As a counterpart you need to put a magnetic disc 10 x 2 mm or 10 x 3 mm on the inside of your clothing.
- For heavy or large name tags you should use two magnets per name tag (one on the left, one on the right) to be on the safe side.
- The thin self-adhesive disc does not work so well on heavy clothing (e.g. winter coat). In that case we recommend using the self-adhesive magnetic disc 20 x 2 mm and the S-20-02-N disc as counterpart.
20 pcs. 0,33 EUR ea.*Disc magnet self-adhesive Ø 10 mm, height 1 mm, holds approx. 540 g
10 pcs. 0,49 EUR ea.*Disc magnet Ø 10 mm, height 2 mm, holds approx. 1,3 kg
10 pcs. 0,58 EUR ea.*Disc magnet Ø 10 mm, height 3 mm, holds approx. 1,8 kg
10 pcs. 1,05 EUR ea.*Disc magnet self-adhesive Ø 20 mm, height 2 mm, holds approx. 2,3 kg
5 pcs. 1,31 EUR ea.*Disc magnet Ø 20 mm, height 2 mm, holds approx. 2,9 kg
Name tags with normal disc magnets
You always need 2 disc magnets per name tag. You can use two magnets of the same size and glue one to the name tag. Especially well-suited for this purpose is the adhesive UHU MAX REPAIR. Before applying the glue, you should lightly roughen the magnet surface with sandpaper to ensure good bonding. Let the glue dry for 24 hours before use.